Load data for 7 x 50 R + .284 | 180gr | CutEdge MTH

Recommended Powder(s): ADI AR 2207, Accurate 1680, Alliant Reloder-7, Norma 200, ReloadSwiss RS 36

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.284 \| 180gr \| CutEdge MTH
Manufacturer SKU:	MTH 284 180 MAX
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.284" \| 7.21mm
Bullet Length:	1.680" \| 42.7mm
Caliber:	7 x 50 R load data
Case Length (l3):	1.940" \| 49.3mm
Cartridge Length (C.O.L.):	2.637" \| 67.0mm
Seated Depth:	0.983" \| 25.0mm
Shank Seated Depth:	0.771" \| 19.6mm
Case Capacity:	34.5 Grains of Water \| 2.24 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	52939 psi \| 3650 bar
LID:	LID_B8466_C1085
Last updated:	2025-01-01
Recommended Twist Rate:	1:7 - 1:6

Load data for 40 loads in caliber 7 x 50 R with .284 | 180gr | CutEdge MTH bullet and 20 powders such as ADI AR 2207, Accurate 1680, Alliant Reloder-7, Norma 200, ReloadSwiss RS 36. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207 👍	<<locked>>	96%	45339	86%	**31	100%
ADI AR 2219	<<locked>>	96%	41597	79%	**21	97%
Accurate 1680 👍	<<locked>>	88%	47355	89%	**21	99%
Alliant Reloder-10x	<<locked>>	95%	35969	68%	**52	99%
Alliant Reloder-7 👍	<<locked>>	96%	47239	89%	**31	100%
Baschieri & Pellagri 106	<<locked>>	96%	41945	79%	**55	98%
[Hodgdon CFE BLK]*	<<locked>>	94%	45687	86%	**75	94%
Hodgdon H322	<<locked>>	95%	33489	63%	**03	95%
Hodgdon H335	<<locked>>	97%	41321	78%	**24	96%
Hodgdon H4198	<<locked>>	96%	46296	87%	**85	98%
IMR 4198	<<locked>>	96%	41133	78%	**65	100%
IMR 4227	<<locked>>	89%	46064	87%	**65	100%
[Lovex D073.4]*	<<locked>>	97%	37724	71%	**55	93%
Lovex S053	<<locked>>	91%	46804	88%	**59	100%
Norma 200 👍	<<locked>>	95%	40944	77%	**04	100%
ReloadSwiss RS 36 👍	<<locked>>	90%	46006	87%	**01	100%
[ReloadSwiss RS 40]*	<<locked>>	97%	37420	71%	**52	93%
SNPE Vectan SP 10	<<locked>>	95%	40219	76%	**11	96%
Vihtavuori N110	<<locked>>	85%	46833	88%	**03	100%
Vihtavuori N120	<<locked>>	97%	42888	81%	**68	100%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	83%	30385	57%	**40	100%
[ADI AR 2219]*	<<locked>>	86%	29994	57%	**44	93%
Accurate 1680	<<locked>>	81%	38087	72%	**06	97%
Alliant Reloder-10x	<<locked>>	90%	30443	58%	**63	98%
Alliant Reloder-7	<<locked>>	85%	33736	64%	**63	99%
Baschieri & Pellagri 106	<<locked>>	89%	34185	65%	**54	96%
[Hodgdon CFE BLK]*	<<locked>>	87%	36927	70%	**63	91%
[Hodgdon H322]*	<<locked>>	92%	29994	57%	**44	93%
[Hodgdon H335]*	<<locked>>	87%	30008	57%	**50	92%
Hodgdon H4198	<<locked>>	87%	35259	67%	**40	95%
IMR 4198	<<locked>>	89%	33112	63%	**50	99%
IMR 4227	<<locked>>	81%	36492	69%	**54	100%
[Lovex D073.4]*	<<locked>>	92%	31618	60%	**67	91%
Lovex S053	<<locked>>	83%	37231	70%	**54	100%
Norma 200	<<locked>>	87%	30937	58%	**67	98%
ReloadSwiss RS 36	<<locked>>	81%	34925	66%	**67	100%
[ReloadSwiss RS 40]*	<<locked>>	92%	31995	60%	**67	91%
[SNPE Vectan SP 10]*	<<locked>>	87%	30951	58%	**67	92%
Vihtavuori N110	<<locked>>	81%	41437	78%	**47	100%
Vihtavuori N120	<<locked>>	89%	34127	64%	**67	100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data